Adhesive and sealant suitable for all construction, repair and farm work. Crystal transparency, seam mobility – 25%, high mold resistance class – S1. Glues any surface, even wet. Adhesive and sealant suitable for all construction, repair and farm work. The formula for crystal clear, one-component product was developed using a new technology based on silanized polyester (MS Polymer). The glue is flexible, perfectly adheres to any surface, even wet. It is possible not only to glue, but also to seal. Has excellent initial adhesion. Corrosion-free, solvent-free, odor-free, water-resistant and paintable. Tensile strength (adhesion force) – 16 kg / cm2.
Users manual – all surfaces must be free of dust, clean, free of grease and oil. Cut off the end of the cartridge tip and screw the nozzle provided with it. Insert the cartridge into the syringe gun and fill the nozzle with glue by pressing the trigger of the gun several times. Squeeze the glue on one of the surfaces to be glued with strips or dots. Press the surfaces to be glued together. Application temperature from + 5°C to + 40°C. Residues of uncured adhesive can be wiped off with a cloth or tissue. The film forms in 5-50 minutes. Fully hardens (3.5-4.5 mm) in 24 hours. The yield of one vial is 10 meters of seam (5 mm). Suitable for outdoor and indoor work. Temperature resistance after hardening – 40°C … + 110°C
Store upright in a dry place at a temperature of + 5°C to + 25°C. Shelf life – 24 months from the date of manufacture, in accordance with the storage rules. Quantity in the box – 12 pcs. Quantity on the pallet – 1248 pcs. The weight of one vial is 0.520 kg. Transport temperature -15°C to +25°C.