Pplus pplus Mega Pistol 65 (yellow)

High-yield all-season professional polyurethane mounting foam. Suitable for work from -20°C to + 30°C. After Hardening has good thermal and sound insulating properties.

SKU: 01-0-0-034
Filling: 820 ml
Color: Yellow
  • Free-blowing output - up to 65 liters / Suitable for all seasons. Operating temperature from - 10°C to + 30°C
  • / Thermal conductivity coefficient - 0.036 W / mK
  • / Cutting time 30 minutes.

Increased yield polyurethane mounting foam. Suitable for work from -10°C to + 30°C. Used in the installation of window frames, door frames, heat and sound insulation, sealing of joints, filling of voids, cracks, gluing of roof tiles and thermal insulation. Foam prevents the formation of mold. Hardened foam has good heat and sound insulation properties. Yield up to 65 liters with free blowing. Secondary expansion 80 %. Thermal resistance 0.036 W / (m * K). Thermal resistance after hardening -50°C … + 90°C. Cutting time 40 min. Full hardening time is 24 hours. Sound attenuation index 61 dB.Users manual – thoroughly clean and moisten the work surface. Shake the vial vigorously and screw on the gun. Invert the vial with the valve facing down. To adjust the mounting foam spray flow, rotate the valve on the back of the gun handle. Fill the cavity with foam. If the foam is used at low temperatures, the vial must be warmed to + 18°C by placing it in warm water or a warm room. Do not wet the surface at air temperatures below 0°C. Residues of undried foam are best cleaned with Foam Cleaner Fome Flex. Remove hardened foam mechanically.