High quality elastic, waterproof, one-component transparent silicone sealant. Suitable for glazing work and work in sanitary premises – for sealing baths, sinks, washbasins, shower cabins, swimming pools, water supply, drainage, PVC pipe joints. Application temperature from +5 °С to +40 °С. Seam mobility 20%.
Users manual – all surfaces must be free of dust, clean, free of grease and oil. Cut off the end of the cartridge tip and screw the nozzle provided with it. Insert the cartridge into the syringe gun and fill the nozzle with sealant by pressing the trigger on the gun several times. Application temperature from +5 °С to +40 °С. The film forms in 10- 20 minutes. Temperature seam resistance: -40 °С – +150 °С. Fully hardens within 24 hours.
| Indicator | Units of measurement | Value | Certificate |
|---|---|---|---|
| Colour | Transparent, white, black, brown, beige, grey | ||
| Basis | Acetate | ||
| Density | g/cm3 | 0,96 | SO 1183-1 |
| Skin formation time | min. | 20 | DBTM 16 |
| Curing speed | mm/24 h | 2-3 | |
| Joint movement capacity | % | 20 | |
| Shore A hardness | 15-25 | EN ISO 868 | |
| Elongation at break | % | 400 | EN ISO 37 |
| Tensile strength | N/mm2 | 1,2 | EN ISO 37 |
| Module E 100% at 23°C | N/mm2 | 0,4 | ISO 8339 |
| Temperature resistance after curing | oC | -40°C…+150°C | |
| Application temperature | oC | +5°C…+40°C | |
| Change in volume | % | 10 | ISO 10563 |
| Volume | ml | 310, 60 |
Store upright in a dry place at a temperature of +5 ° C to +30 ° C. Shelf life – 18 months (not specified) from the date of manufacture in accordance with storage conditions. Quantity in the box – 12 pcs. Quantity on the pallet – 1440 pcs. Transport temperature from -15 ° C to +25 ° C.
