Fast drying, one-component, multi-purpose acrylic liquid paint and sealant, green RAL6005, 6 kg. It is ready-to-use and highly flexible coating used to protect, seal and decorate surfaces such as concrete, trapezoidal and galvanized sheet metal, bitumen shingles, roofing felt, metal, ceramic and cement roof tiles, plaster, and wood.
The coating has excellent resistance to weather conditions. It is very easy to apply and has a wide range of applications. The product can be used to renovate surfaces such as roofs, tool sheds, concrete fences, walls and small garden structures such as gazebos, shelters, pergolas, planters, wells and more.
The product is without solvents.
Application areas:
- For renovation, decoration, sealing and protection;
- For flat and pitched roof;
- For chimneys, gutters, ventilation outlets;
- For fences, gates and wickets;
- For walls, balconies and house plinth;
- For small garden structures such as gazebos, shelter, pergolas, planters, wells, tool sheds and more;
- Can be used on concrete, plaster, metal sheets, bituminous surfaces, ceramic and cement tiles, wood.
Restrictions:
- Coating can not be used during rain or frost.
- It is not suitable for full waterproofing.
- Also, not suitable for use on foundations.
- Drying time depends on type of substrate, temperature and humidity.
Surface preparation:
The surface should be clean, smooth, dry and free of grease, mechanical damage and other particles that reduce adhesion. Larger defects should be filled. Powder-coated surfaces should be slightly abraded and cleaned. Absorbent substrates should be primed with FOME FLEX HYDROPROTECT Primer. Non-absorbent surfaces, such as metal sheets, felt and bitumen substrates, should be primed with a 5:1 paint-to-water mixture. Improper substrate preparation reduces coating adhesion.
Applications:
Mix the product well before use, do not dilute. Mix products from different batches before use. Apply the paint in at least two coats with a brush or roller. Apply the second coat only after the first one is completely dry, after about 2 h. Each coat should be at least 1 mm thick. Protect freshly painted surfaces from rain and direct sunlight until the coating is fully cured (min. 24 h). Low temperatures and lack of adequate air circulation prolong the drying time.
Cleaning:
Clean the tools and uncured coating with FOME FLEX Profi Wipes, after curing – mechanically.
| Indicator |
Value |
Unit |
| Consumption for protection and sealing |
0.4-0.8 |
kg/m² |
| Minimum coating thickness |
1 |
mm |
| Consumption for painting |
0.15-0.25 |
kg/m² |
| Minimum coating thickness |
0.3 |
mm |
| Number of layers |
Min. 2 |
– |
| Drying time at 23 °C / 50% RH (1 mm layer) |
Approx. 2 |
h |
| Specific gravity |
1.4 |
g/cm³ |
| Application temperature |
+5 to +25 |
°C |
| Temperature resistance |
-20 to +80 |
°C |
| Complete drying time |
Approx. 24 |
h |
Technical parameters for spraying:
| Method of application |
Thinner quantity |
Nozzle size |
Pressure |
| Airless spraying |
Undiluted |
0.031″-0.035″ |
18-21 MPa (≈ 180-210 bar) |
* The nozzle and pressure should be selected so that the coating can be applied without dilution.
** Diluting the coating may result in poorer coverage, a thinner coating and reduced protection.
If it is not possible to achieve satisfactory results with the available nozzle and pressure settings — for example, if the nozzle gets clogged or the coating develops a “pebbled” texture — the coating can be diluted by a maximum of 10% with water.
Product is packaged in 1 kg., 3 kg. and 6 kg. buckets. Store up to 24 months from the production date indicated in original sealed packaging at +5 °C to +30 °C. Protect from frost and direct sunlight.
Transport at a temperature of not less than 5 °C.
