High quality bitumen sealant for gluing and sealing roof overlapping parts. Resistant to snow and rain. Seals and on wet surfaces. The film forms in 8-30 minutes. Thick consistency can be used in vertical joints. Resistant to rain and snow immediately after lubrication. Suitable for use on wet surfaces and at low temperatures if the sealant was warm. Melting point is higher than +90 ° С. It does not become brittle during the cold. Weather resistant. Flexible. Application temperature from +5 ° С to +30 ° С.
Users manual – Surfaces must be clean, free of grease residues and dry. Cut off the end of the cartridge tip and screw the nozzle included in the kit onto it. Insert the cartridge into the syringe of the gun and fill the nozzle with sealant by squeezing the trigger of the gun several times. Temperature seam resistance: -50 ° С – +90 ° С. Fully hardens within 24 hour.
| INDEX | UNITS | VALUE | CERTIFICATION |
|---|---|---|---|
| COLOUR | Black | ||
| BASE MATERIAL | BITUMEN | ||
| DENSITY | g/ml | 1,2 | |
| YIELD (5 MM SEAM) | m | 15 | |
| SKIN FORMING TIME | min. | 8-30 | |
| HARDNESS (SHORE A) | 20-25 | DIN 53505/ ISO 868 | |
| VERTICAL LEAKAGE | mm | 3-5 | ISO 7390 |
| FULL CURING TIME (2 MM) | val. | 24 | |
| TEMPERATURE RESISTANCE AFTER CURING | oC | -50…+90 | |
| WORKING ENVIRONMENT TEMPERATURE | oC | +5…+30 | |
| VOLUME | ml | 300 |
Store upright in a dry place at a temperature of +5 ° C to +25 ° C. Shelf life – 18 months from the date of manufacture, in accordance with the storage rules. Quantity in the box – 12 pcs. Quantity on the pallet – 1440 pcs. Transport temperature from -30 ° C to +25 ° C.
