White, paintable sealant based on acrylic dispersion. Used indoors for filling cracks and fissures in masonry, concrete or plastered walls. Suitable for repair and finishing work by filling stable joints and removing surface defects: cracks, scratches, and unevenness. Application temperature from +5 °С to +40 °С. Seam mobility 12,5%
Users manual – all surfaces must be free of dust, clean, free of grease and oil. Highly porous surfaces such as gypsum, aerated concrete, limestone and etc. need to be primed. Cut off the end of the cartridge tip and screw the nozzle provided on with. Insert the cartridge into the syringe gun and fill the nozzle with sealant by pressing the trigger on the gun several times. When the joint width is up to 10 mm., the width to depth ratio must be 1: 1. If the joint is wider than 10 mm., then the depth is the width divided by 3, plus 6 mm. The film forms in 5 minutes. Application temperature from +5 ° С to +40 ° С. Temperature resistance after hardening from -20 ° C to +75 ° C.
| Indicator | Units | Certification | Value |
|---|---|---|---|
| Base | – | – | Acrylic dispersion |
| Color | – | – | White, gray |
| Density | g/cm³ | – | 1.56 |
| Surface setting time | min. | – | 7 |
| Leakage level in vertical position | mm | – | <2 |
| Joint mobility | % | EN 15651-1 | 12.5 |
| Shore A hardness | – | EN ISO 868 | 53 |
| Tensile to rupture | % | ISO 8339 | 200 |
| Tensile strength | N/mm² | DIN 53504 | 0.52 |
| Modulus of elasticity at 100% at 23 °C | MPa | ISO 8339 | 0.5 |
| Setting speed | mm / 24 hrs. | – | 2 |
| Temperature resistance after setting | °C | – | -10 °C to +80 °C |
| Working environment temperature | °C | – | +5 °C to +35 °C |
| Volume | ml | – | 310 |
Store upright in a dry place at a temperature of +5 °C to +25 °C. Shelf life – 18 months from the date of manufacture, in accordance with the storage rules. Quantity in the box – 12 pcs. Quantity on the pallet – 1248 pcs. Transport temperature from -15 °C to +25 °C.
