This polyurethane sealant has a high mechanical resistance,always elastic, hardens quickly and is easy to apply. Curing speed 3 mm per day. Resistant to water, sea
water, diluted alkalis, cement mortars and detergents in water dispersion.
FOME FLEX PU-45 Professional sealant HM
FOME FLEX PU-45 PROFESSIONAL HM – this high modulus, one-component, polyurethane sealant and adhesive for sealing structural and expansion joints, roof joints and floors in pedestrian areas.
- Permanent elasticity
- Elongation at break 500%
- High mechanical resistance
- Zero shrinkage
- Excellent adhesion to most surfaces
Surfaces must be dry, clean and free from grease. Application temperature from +5 °C to +40 °C. Cut the end of the cartridge or 600 ml package and screw the nozzle on the cartridge supplied with it. Insert the cartridge orpackage into the caulking gun and fill the nozzle with glue by pressing the trigger on the gun several times. The
joint depth should always be in the correct relationship of the joint width. A
general rule is the ratio of joint depth to the width of the joint with a joint width up to 10 mm is 1:1, with a minimum of 5 mm in width and depth. For joints wider than 10 mm, the depth is the width divided by 3 plus 6 mm. Maximum joint width is 35 mm.
| Indicator | Units | Value |
|---|---|---|
| Colour | Grey (concrete) | |
| Density | g/ml | 1,18 |
| Skin formation | min. | 60-90 |
| Shrinkage | % | 0 |
| Vertical flow | mm | 0 |
| Joint movement capacity | % | 25 |
| Shore A | 45 | |
| Elongation at break | % | 500 |
| Module 100% | N/mm2 | 0,4 |
| Thermal resistance after curing | oC | -30°C…+80°C |
| Application temperature | oC | +5°C…+35°C |
| Curing speed | mm/24 hours | 03-vas |
| Fire resistance class | E | |
| Tensile strength after curing | MPa | 1.5 |
| Volume | ml. | 600 |
Store upright in a dry place at +5 °C to +25 °C. Expiry date – 18 months from date of manufacture, subject to storage regulations. Quantity per box – 12 pcs. Quantity per pallet – 600 pcs.