Silicate-based sealant, black for use at high temperatures. Used to insulate and fill cracks in places exposed to extremely high temperatures. Applies comfortably and evenly. When heated, the mass will become dark gray, extremely hard and will withstand extreme temperatures (up to +1500 ° C for a short time). Suitable for working with natural stones. Application temperature from +5 ° С to +40 ° С. The film forms in 5 minutes.
Users manual – surfaces must be clean, free of grease residues and dry. Cut off the end of the cartridge tip and screw the nozzle included in the kit onto it. Insert the cartridge into the syringe gun and fill the nozzle with sealant by squeezing the trigger of the gun several times. After applying, smooth the surface with a rubber or silicone putty and remove any material residue. In some cases, it is more convenient to use a gypsum spatula. After final curing, slowly heat the sealant to + 250 ° C. When heated, the mass will become dark gray and become particularly hard. Temperature resistance of the seam up to +1500 °С.
| INDEX | UNITS | VALUE | CERTIFICATION |
|---|---|---|---|
| COLOUR | BLACK | ||
| BASE MATERIAL | SILICATE | ||
| DENSITY | g/ml | 2,04 | DIN 53 479-B |
| YIELD (5 MM SEAM) | m | 10 | |
| SKIN FORMING TIME | min. | 5 | |
| HARDNESS (SHORE A) | 75 | DIN 53505/ ISO 868 | |
| SEAM MOBILITY | % | 0 | ISO 11 600 |
| FULL CURING TIME (1-2 MM) | val. | 24 | |
| TEMPERATURE RESISTANCE AFTER CURING | 0C | iki +1500 | |
| WORKING ENVIRONMENT TEMPERATURE | 0C | +5…+40 | |
| VOLUME | ml | 300 |
Store upright in a dry place at a temperature of +5 ° C to +25 ° C. Shelf life – 18 months from the date of manufacture, in accordance with the storage rules. Quantity in the box – 12 pcs. Quantity on the pallet – 1440 pcs. Transport temperature from -5 ° C to +30 °C.
