FOME FLEX 100% SILICONE, white premium quality sanitary sealant

Premium quality, white sanitary-acid silicone for professionals.

SKU: 01-4-2-046
Filling: 310 ml
Color: White
  • Maximum protection against mold - XS1
  • Can be used in the shower after 25 minutes
  • Very elastic and extremely durable seam
  • Does not change color

Fome Flex 100% is a premium quality, white sanitary-acid clear silicone for professionals. This product is perfect for sealing in bathrooms and kitchens. Fome Flex 100% silicone is resistant to UV rays and temperature fluctuations, making it ideal for work not only indoors but also outdoors. The highest concentration and highest quality silicone material and the highest protection against mold ensure a fast and guaranteed work result. Extremely fast polymerization time allows you to use a shower, bath or kitchen sink after 25 minutes. One of the highest Shore A hardness indicators allows the formation of a durable and highly durable seam. Due to the optimal density and tensile strength indicators, the product is extremely easy to apply. All the features of this product allow you to give it a 10-year warranty. Seam mobility 20%.

Users manual. Surfaces must be clean, free of grease residues and dry. Cut off the end of the cartridge tip and screw the nozzle included in the kit onto it. Insert the cartridge into the syringe gun and fill the nozzle with sealant by squeezing the trigger of the gun several times. The ratio of joint depth to width when the width of the seams up to 10 mm. must be 1: 1. Minimum depth 5 mm. For seams wider than 10 mm., the depth is calculated by dividing the width by 3 plus 6 mm. Application temperature from +5 ° С to +40 ° С. The film forms in 5 minutes. Temperature seam resistance: -40 ° С – +180 ° С. Fully hardens within 24 hours.

INDEX UNITS VALUE CERTIFICATION
COLOUR   WHITE  
BASE MATERIAL   ACETATE SILICONE  
DENSITY g/ml 1,02  
MODULE 100% N/mm2 0,27 DIN 53504 S2
TENSILE STRENGTH kg/cm2 18 DIN 53504 S2
MOLD RESISTANCE   XS1 EN 15651-3
YIELD (5 MM SEAM) m 15  
SKIN FORMING TIME min. 5  
SEAM MOBILITY % 20 EN 15651-1
ELONGATION AT BREAK % 650 DIN 53504 S2
HARDNESS (SHORE A)   21 DIN 53505/ ISO 868
VERTICAL LEAKAGE mm <2 ISO 7390
FULL CURING TIME (2 MM) h 24  
TEMPERATURE RESISTANCE AFTER CURING oC -40…+180  
WORKING ENVIRONMENT TEMPERATURE oC +5…+40  
VOLUME ml 310

Store upright in a dry place at a temperature of +5 ° C to +25 ° C. Shelf life – 24 months from the date of manufacture, in accordance with the storage rules. Quantity in the box – 12 pcs. Quantity on the pallet – 1248 pcs. Transport temperature from -15 ° C to +25 ° C.