• New
Point 006 High Temp&Tack kontaktiniai klijai

Point 006 High Temp&Tack contact adhesive

A multipurpose web spray contact adhesive.

SKU: 03-2-1-003
Filling: 500 ml
Color: Transparent
  • For indoor and outdoor use
  • Fast drying: 1-2 minutes of flash off time
  • Temperature resistance -30°C to 120 °C
  • Open time – 40 minutes

A multipurpose web spray contact adhesive. With increased adhesion strength and temperature resistance to 120 °C. Can be used indoors and outdoors for a wide range of applications such as: bonding foam, fabric, leather and other lightweight materials to rigid plastic, metal, concrete, masonry, plaster, cardboard, ceramics, glass and wood based substrates. Perfect for vehicle
trimming applications.

Application:

  • Bonding foam, fabric, leather and other lightweight materials to rigid plastic, metal, concrete, masonry, plaster, cardboard, ceramics, glass and wood based substrates.
  • Bonding many materials in furniture, automotive, packaging, constructions.
  • Perfect for vehicle trimming applications.
  • Not recommended for use with plasticised vinyl, flexible plastics, expanded/extruded polystyrene, PE or PP.

Remarks/Restrictions:

Product can not be used during rain or frost.

Use only in well ventilated areas.

Do not exceed open time of the adhesive.

If adhesive is expelled wet or as a jet – canister is too cold, it should be moved to warm environment to allow to acclimatise before reusing.

Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. All given parameters are based on laboratory tests compliant with internal manufacturer’s standards and strongly depend on product hardening conditions (c.a., ambient, surface temperature, quality of used equipment and skills of person applying the product).

The surface should be clean, dry, smooth, free of grease, mechanical damage and other particles that reduce adhesion.

Shake the product well before use (for at least 30 sec).

Bonding can be done from 0 °C to +35 °C, but the recommended application and product temperature should be in range from +15 °C to +27 °C. If not complying recommended temperatures, the drying times and adhesion properties deteriorates.

For permanent adhesion apply the product on both surfaces in an equal layer, allow to dry 3 minutes and press both sides together.

For temporary adhesion apply the product on one surface in an equal layer, allow to dry 3 minutes and press both sides together.

On porous surfaces apply several layers. Spraying distance is about 20 cm. from the surface.

Indicator Value Units
Viscosity 600 CPS
Solid content 27–29 %
Coverage 500 ml 2 m²
Colour Clear –
Temperature resistance -30 … +120 °C
Flash off time 1–2 min.
Open time 40 min.
Recommended application and product temperature +15 … +27 °C
Bonding temperature 0 … +35 °C
Direction of use Double sided –

Product is packaged in 500 ml. cans.

Store up to 18 months from the production date indicated in original sealed packaging at +10 °C to +50 °C.

Protect from frost and direct sunlight. Do not store directly on concrete floor.

Transport at a temperature of not less than +10 °C.

Documents files

Related products