Gudfor finishing master’s glue for skirting boards and edging GUDFOR 911 (white)

Finishing master glue based on MS Polymer for fixing skirting boards and edging, GUDFOR 911

SKU: 03-9-1-011
Filling: 290 ml
Color: White
  • High adhesion force: 32 kg / cm2
  • / Always elastic seam
  • / Can be glued on wet surfaces / Strong initial adhesion.

Finishing master’s glue for fixing GUDFOR skirting boards and edgings – advanced technologies based on MS Polymer, optimally adapted for skirting boards, door edgings made of wood, MPP, MDP, OSB or plastic. We can glue GUDFOR skirting boards and edgings on almost all surfaces found in construction. They do not shrink when stiffened, they do not emit vapors, the glued surfaces do not swell from them. Also, these adhesives are non-aggressive, diluent-free, isocyanate-free, odorless. Does not cause metal corrosion, does not change the color of stone, brick, concrete, marble. They are resistant to UV and weather conditions, they can be painted. Suitable for outdoor and indoor work. Tensile strength (adhesion force) – 32 kg / cm2. Curing time 3 mm in 24 hours. The yield of one vial is about 10 m of seam (5 mm thick). Colour – white. The film forms in 10 minutes. Can also be used as a sealant.Users manual – All surfaces must be free of dust, clean, free of grease and oil. Cut off the end of the cartridge tip and screw the nozzle provided on it. Insert the cartridge into the syringe gun and fill the nozzle with glue by pressing the trigger of the gun several times. Squeeze the glue on one of the surfaces to be glued with strips or dots. Press the surfaces to be glued together. Correction time 10 min. Application temperature from +5°С to +40°С. Temperature resistance after hardening from -40°C to +80°C. The adhesive seam can be painted